Autor Wątek: Ares I-X  (Przeczytany 5576 razy)

0 użytkowników i 1 Gość przegląda ten wątek.

Offline Air Q

  • Weteran
  • *****
  • Wiadomości: 1895
Ares I-X
« dnia: Lipiec 15, 2010, 23:27 »

(Po lewej: logo lotu testowego Ares I-X, po prawej: logo programu Constellation)

Wstęp

Ares I-X będzie pierwszym lotem testowym nowej rakiety projektowanej na potrzeby programu Constellation. W przyszłości Ares I ma służyć do wynoszenia statków Orion na niską orbitę okołoziemską LEO. Głównym celem tego lotu testowego jest:
  • przetestowanie procedur oraz niektórych wyposażeń naziemnych, które w przyszłości będą stosowane podczas przygotowań do startów rakiet Ares I, w tym testy sposobów odzyskiwania (wyławiania) pierwszego członu Aresa, który jest nieco większy niż standardowy SRB stosowany na wahadłowcach.
  • dynamika lotu (pierwsza faza lotu) będzie będzie bardzo podobna do lotu docelowego Aresa, umożliwi to przetestowanie systemów kontroli.
  • test separacji pierwszego i drugiego członu, w tym przede wszystkim silniczków: Booster Deceleration Motors-BDM (oddalających pierwszy stopień od drugiego) oraz Booster Tumble Motors-BTM (silniczki powodują obrót SRB zaraz po separacji w celu lepszego hamowania atmosferycznego).

(Lokalizacja silniczków BDM i BTM)
  • testy nowych spadochronów zaprojektowanych dla pięciosegmentowych SRB.
"One could write a history of science in reverse by assembling the solemn pronouncements of highest authority about what could not be done and could never happen."
http://qt.exploratorium.edu/mars/opportunity
Sprawdź SOL: http://www.greuti.ch/oppy/html/filenames_ltst.htm

Offline Air Q

  • Weteran
  • *****
  • Wiadomości: 1895
Odp: Ares I-X
« Odpowiedź #1 dnia: Lipiec 15, 2010, 23:27 »
Ares I-X budowa
Rakieta Ares I-X składać się będzie z następujących elementów:
  • Pierwszy człon: czterosegmentowy SRB taki jak stosowany w wahadłowcach, z tą różnicą, że na szczycie umieszczony zostanie dodatkowy "nieaktywny" piąty segment. Całość ma symulować rozmiar oraz masę prawdziwego pierwszego członu Aresa I.

    (Pierwszy człon Aresa I-X, widoczny nieaktywny piaty segment)
  • Drugi człon (Upper Stage Simulator-USS): kształt, masa oraz położenie środka ciężkości ma być takie jak fragment prawdziwego Aresa I od łącznika pomiędzy pierwszym, a drugim członem do modułu serwisowego Oriona włącznie.
    W USS zamontowany zostanie system kontroli Roll Control System (RoCS). Jego podstawowym zadaniem będzie:
      -obrót rakiety o 90 stopni wzdłuż osi pionowej zaraz po starcie
      -przeciwdziałanie obrotowi wzdłuż tej osi podczas wzlotu
     
      (Działanie Roll Control System)



    (Drugi człon: Upper Stage Simulator-USS)
  • Orion CM/LAS: makieta modułu załogowego Oriona (CM) oraz makieta systemu ratowniczego Launch Abort System (LAS). Symulator CM/LAS posiadać będzie około 150 czujników mierzących parametry dotyczące warunków: termicznych, akustycznych, wibracji i innych. Wszystkie dane będą przesyłane na bieżąco telemetrycznie oraz zostaną zapisane w First Stage Avionics Module (FSAM) znajdującym się w pierwszym członie w piątym segmencie SRB.

    (Makieta modułu załogowego Oriona wraz z makietą rakiety ratowniczej)
"One could write a history of science in reverse by assembling the solemn pronouncements of highest authority about what could not be done and could never happen."
http://qt.exploratorium.edu/mars/opportunity
Sprawdź SOL: http://www.greuti.ch/oppy/html/filenames_ltst.htm

Offline Air Q

  • Weteran
  • *****
  • Wiadomości: 1895
Odp: Ares I-X
« Odpowiedź #2 dnia: Lipiec 15, 2010, 23:28 »
Sposób montażu elementów Aresa I-X

Poniższy schemat pokazuje kolejność montażu poszczególnych elementów rakiety Ares I-X. Po dostarczeniu do budynku VAB elementów: Orion CM/LAS, Upper Stage Simulator oraz piątego segmentu pierwszego stopnia, nastąpi wstępny montaż tychże segmentów w High Bay-4 zgodnie z poniższym schematem.

Następnie wewnątrz High Bay-3 rozpocznie się montaż fragmentów pierwszego członu (cztery segmenty SRB) na ruchomej platformie startowej (Mobile Launcher Platform nr1). Wtedy też elementy z High Bay-4 zostaną przetransportowane do High Bay-3 w celu odpowiedniego zmontowania. Dla lepszego zorientowania się gdzie znajdują się High Bay nr: 3 i 4 poniższy schemat:
http://www.capcomespace.net/dossiers/espace_US/shuttle/ksc/VAB/VAB%20dessin%20interieur%203.jpg


(Wstępny montaż elementów w High Bay-4)


(Pod koniec marca cztery segmenty SRB dotarły do KSC)
"One could write a history of science in reverse by assembling the solemn pronouncements of highest authority about what could not be done and could never happen."
http://qt.exploratorium.edu/mars/opportunity
Sprawdź SOL: http://www.greuti.ch/oppy/html/filenames_ltst.htm

Offline Air Q

  • Weteran
  • *****
  • Wiadomości: 1895
Odp: Ares I-X
« Odpowiedź #3 dnia: Lipiec 15, 2010, 23:28 »
Modyfikacja instalacji naziemnych

  • zdemontowano niektóre platformy wewnątrz VAB
  • zainstalowano nowy sprzęt komputerowy w sali skąd przeprowadza się odliczanie do startu
  • na LC-39B zostanie zainstalowana nowa wyższa wieża chroniąca przed wyładowaniami atmosferycznymi
  • Environmental control systems (ECS) służący do regulacji temperatury wewnątrz USS oraz piatego segmentu SRB (tam gdzie znajdować się będzie awionika)
  • Vehicle Stabilization System (VSS) przedziwdziałający kołysaniu się całej rakiety podczas przebywania na ruchomej platformie startowej
  • niedawno platforma startowa MLP-1 została przekazana do wykorzystania dla tego lotu, tutaj też dokonano niezbędnych modyfikacji:
    http://kosmonauta.net/index.php?option=com_content&view=article&id=321&Itemid=72

Przebieg lotu
Po starcie przez około dwie minuty Ares I-X będzie poddawany podobnym warunkom jakich doświadczać będzie Orion/Ares I podczas przyszłych lotów. Ares I-X osiągnie prędkość 4.7 Macha i w 123 sekundzie lotu (wysokość około 39km) nastąpi separacja pierwszego i drugiego członu. Przewiduje się, że maksymalna osiągnięta wysokość będzie wynosić 45km. Po separacji elementy drugiego stopnia: Upper Stage Simulator oraz Orion CM/LAS wpadną do Atlantyku. Pierwszy człon opadnie na spadochronach, aby następnie zostać wyłowiony przez ekipę naziemną. Przebieg lotu pokazuje poniższy schemat:

(Rysunek obrazujący przebieg lotu testowego)

http://www.youtube.com/v/PZfrxUgZSuM&hl=pl&fs=1
(Animacja pokazująca przebieg lotu: )
Inna ciekawa animacja:



Linki

Opis na wikipedii
http://en.wikipedia.org/wiki/Ares_I-X

Strona główna NASA
http://www.nasa.gov/mission_pages/constellation/ares/flighttests/aresIx/index.html

Wzmianki o Aresie I-X na portalu kosmonauta.net
http://kosmonauta.net/index.php?option=com_search&searchword=Ares-1x&areas
« Ostatnia zmiana: Lipiec 16, 2010, 00:15 wysłana przez Matias »
"One could write a history of science in reverse by assembling the solemn pronouncements of highest authority about what could not be done and could never happen."
http://qt.exploratorium.edu/mars/opportunity
Sprawdź SOL: http://www.greuti.ch/oppy/html/filenames_ltst.htm

Polskie Forum Astronautyczne

Odp: Ares I-X
« Odpowiedź #3 dnia: Lipiec 15, 2010, 23:28 »

Online Orionid

  • Weteran
  • *****
  • Wiadomości: 24418
  • Very easy - Harrison Schmitt
Odp: Ares I-X
« Odpowiedź #4 dnia: Marzec 02, 2019, 13:47 »
Wystartował Ares I-X
  28.10.2009 o 15:30 z KSC wystartował do lotu balistycznego demonstrator planowanej RN Ares-1
pod nazwą Ares 1-X.
http://lk.astronautilus.pl/n091016.htm#02



Misja Ares I-X – opis lotu
BY KRZYSZTOF KAJDA ON 24 PAŹDZIERNIKA 2009
https://kosmonauta.net/2009/10/ares-i-x/

Dzień na żywo: Start Aresa I-X (odwołany!)
BY ADAM PIECH ON 27 PAŹDZIERNIKA 2009
https://kosmonauta.net/2009/10/live-ares-i-x/

Ares I-X: druga próba startu
BY KRZYSZTOF KANAWKA ON 28 PAŹDZIERNIKA 2009
https://kosmonauta.net/2009/10/2009-10-28-ares-ix/

Ares I-X, stan SRB po locie testowym
BY KRZYSZTOF KAJDA ON 29 PAŹDZIERNIKA 2009
https://kosmonauta.net/2009/10/ares-i-x-stan-srb-po-locie-testowym/

https://blogs.nasa.gov/Ares_I-X/
https://ntrs.nasa.gov/api/citations/20100033273/downloads/20100033273.pdf

https://www.nasaspaceflight.com/2009/10/live-ares-i-x-second-launch-attempt/
https://www.nasaspaceflight.com/2009/11/ares-pressing-forward-plans-ares-i-x-prime-flight/
https://www.nasaspaceflight.com/tag/ares-i-x/

https://spaceflightnow.com/ares1x/experience/

https://astropolis.pl/topic/29626-ares-1-x/
https://pl.wikipedia.org/wiki/Ares_I-X

EDIT 29.10.2023
Cytuj
ça s'est passé un 28 octobre 2009 (c'est calme aujourd'hui en anniversaires ''ronds'')
Cytuj
Il n'y a eu qu'un seul vol durant cette courte période d'existence du programme Constellation : Un Ares I-X a volé le 28 octobre 2009. Le vol a rempli quasiment tous ses objectifs.
#UnJourUnObjetSpatial n° 00039 du 5 juillet 2018
https://souvenirsdespace.lebonforum.com/t1575p25-un-jour-un-objet-spatial#4507
https://x.com/spacemen1969/status/1718149093392834935
« Ostatnia zmiana: Październik 29, 2023, 02:58 wysłana przez Orionid »

Online Orionid

  • Weteran
  • *****
  • Wiadomości: 24418
  • Very easy - Harrison Schmitt
Odp: Ares I-X
« Odpowiedź #5 dnia: Marzec 02, 2019, 13:50 »
NASA Successfully Launches Ares 1-X
by Clara Moskowitz — October 28, 2009


NASA's Ares I-X rocket prototype launches on a suborbital test flight from the Kennedy Space Center, Fla. Credit: NASA TV image

CAPE CANAVERAL, Fla. — A one-of-a-kind NASA rocket soared into the Florida sky Oct. 28 in a brief but critical test flight of a new booster slated to launch astronauts into space and, eventually, toward the Moon.

NASA’s Ares 1-X booster, an unmanned prototype of the planned Ares 1 rocket intended to carry astronauts after the space shuttle fleet retires, blasted off on an experimental mission from the seaside Launch Pad 39B here at the Kennedy Space Center (KSC).

“I can’t tell you how proud I am of all of ya,” KSC director Bob Cabana told the launch team after liftoff. “That was just unbelievable, it was spectacular. I got tears in my eyes.”

After several false starts due to bad weather, the rocket took advantage of a brief break in the clouds to loft at 11:30 a.m. EDT. Foul weather and a series of unlucky events foiled its first launch attempt the day before. NASA required good visibility for this first flight of the untried rocket.

“Think about what we just did,” said launch director Ed Mango after the liftoff.

“Our first flight test and the only thing we’re waiting on was weather. That says you all did frickin’ fantastic,” he told the team.

The rocket lifted off despite a bout of thunderstorms that passed over it the night before. About 150 lighting strikes were seen to fall near the site, with four lightning impacts within about a kilometer of the launch pad. The countdown toward liftoff was delayed Wednesday morning while ground crews checked out the vehicle to make sure it suffered no lightning damage; luckily, the tests showed Ares I-X was safe to fly.

“We looked at all the systems that could have been affected by this and all the data indicates that there was absolutely no real effect,” Ares 1-X deputy mission manager Jon Cowart said.

The towering white booster rose into the sky toward the east, peaked at about 45 kilometers altitude, then dropped into the Atlantic Ocean, with parachutes softening its fall. By all appearances, the launch – which was aimed at demonstrating the rocket’s design — was successful.


Wealth of data

The mission is expected to return a wealth of data – readings from more than 700 onboard sensors as well as visual evidence from cameras on the ground and borne by flying aircraft. NASA engineers will pore over the information to study the rocket’s trajectory and performance to help confirm and shape the design of Ares 1, assuming the agency goes forward with the program.

“It’s a huge amount of data,” said Bob Ess, Ares 1-X mission manager. “It’s reams and reams of data that will take at best months to go through and understand.”

The teams plan to release periodic reports over the next three months to share the results of the fact-finding test flight. “We’ll come back and tell the agency and the public what we learned from the flight,” Ess said.

An Oct. 27 launch attempt was stymied by clouds, winds and the threat of rain. If the rocket travels through high clouds it runs a risk of triggering “trioboelectrification” – static electricity that could interfere with sensitive onboard instruments. In addition to weather concerns, a stuck cover on one of the rocket’s probes stalled that morning, further delaying the countdown, and a freight boat later strayed into restricted waters close to the launch pad, thwarting one launch attempt.

The 100-meter-tall Ares 1-X rocket was composed of a real first stage, with four solid-rocket segments and a dummy fifth segment on top.  It also carried a simulated upper stage and crew capsule to mimic the intended size and mass of a full Ares 1 booster.

The solid-rocket elements were based on the solid rocket boosters that help lift space shuttles into orbit.

After liftoff, the rocket’s two stages separated as planned about two minutes into the flight when an explosive device along their boundary fired on schedule. The first stage sank under parachutes to be collected by boats from the sea so that its onboard data could be retrieved. The dummy second stage was left to sink into the Atlantic Ocean.


Uncertain future

Despite the apparent success of Ares 1-X’s flight, the ultimate future of the Ares 1 rocket is uncertain.

The booster was originally designed to replace the space shuttles as a vehicle to ferry crews to the international space station. But the station is set to be de-orbited around 2016 and Ares 1 is not likely to be ready before 2017, defeating much of its purpose, some experts have said.

Last week, an independent review team appointed by U.S. President Barack Obama released a report detailing the status of America’s human spaceflight program, and outlined possible alternate visions for NASA’s future.

The president is currently reviewing the report and is expected to make a decision soon about whether to proceed with the Constellation program, which includes Ares 1, or take the agency in a new direction. The report suggested Obama consider giving up on Ares 1 and instead urge private industry to step in and design a low-earth orbit vehicle for humans. That way, NASA could focus on building a heavy-lift vehicle to take people to the moon and Mars.

Despite the doubts hanging over the program, and the perhaps unfortunate timing of the panel’s report being released less than a week before the Ares 1-X launch, mission managers say they are focusing on the task at hand.

“The timing is what it is, but the test is significant and it’s one that we fully back,” said Doug Cooke, NASA associate administrator for exploration systems.

Mission managers said that even if NASA does not go forward with Ares 1, the Ares 1-X flight test provided useful data, not just about that particular rocket, but about the process of designing and building new rockets in general.

“The data were going to get and the objectives we’re going to get are really germane to a whole class of launch vehicles,” Ess said.


https://spacenews.com/nasa-successfully-launches-ares-1-x/
https://spacenews.com/bad-weather-delays-ares-1-x-launch/

Online Orionid

  • Weteran
  • *****
  • Wiadomości: 24418
  • Very easy - Harrison Schmitt
Odp: Ares I-X
« Odpowiedź #6 dnia: Marzec 02, 2019, 13:51 »
NASA Views Ares 1-X Test Rocket Debut as a Success Despite Parachute Mishap
by Clara Moskowitz — December 7, 2009


Constellation scientists say the successful test flight of the prototype Ares 1-X will provide data for future launch vehicle development. Credit: NASA photo courtesy of Scott Andrews

NEW YORK — NASA is still perplexed over the parachute failure that damaged its new Ares 1-X test rocket during its October test launch, but otherwise the debut flight went well, mission managers said.

The $445 million suborbital Ares 1-X rocket, NASA’s first prototype of the vehicle it is developing to carry humans to orbit after the space shuttles retire, blasted off Oct. 28 from the Kennedy Space Center in Florida. It soared eastward into the sky, peaked at about 45 kilometers altitude, then the solid-rocket first stage separated from its dummy second stage and dropped into the ocean as planned.

But two of three parachutes failed to deploy to soften the spent first stage’s splashdown. Consequently, the booster hit the water harder than expected, causing a huge dent and other damage.  Since the parts are not intended to be reused, mission managers said the malfunction was not a major problem and they were able to gather all the data they needed.

“We’re still investigating what happened there and why,” said Marshall Smith, chief of the System Engineering and Integration Office for the Ares 1-X mission, during a Dec. 3 news conference.

Mission managers suspect that the chutes deployed earlier than planned, and thus took on more force than they were designed for, resulting in their failure.

The towering 100-meter Ares 1-X rocket was loaded with more than 700 onboard sensors to gather data about the booster’s trajectory and performance.

Among the promising signs revealed in the report was the fact that the rocket shook and rolled much less than some models predicted, which originally had been a concern for the Ares 1 design concept. Additionally, early visuals raised some fears that the first and second stages might have hit each other, or “re-contacted,” after separation, but detailed analysis revealed that they did not.

“First-stage separation was entirely nominal,” Smith said. “We’re pretty confident there’s no recontact issues.”

Additionally, three connectors failed to detach during the separation of the first and second stages. This was somewhat expected though, and the two pieces separated anyway, ripping the connectors.

“It didn’t really matter,” said Bob Ess, Ares 1-X mission manager. “We did assess this possible failure scenario before launch.”

Another odd finding was the measurement of the structural damping, which is basically how much the structure of the rocket is able to resist vibrations, during the test launch. The booster experienced about 20 percent less damping than models had predicted.

“I can’t tell you whether it’s bad or good — it just doesn’t match,” Smith said.

The engineers plan to investigate that issue and others as they continue to review the data, which are still in preliminary stages of analysis. Almost all the data were recovered from the rocket when teams retrieved the stage from the ocean, though the data at the end of the flight were not recorded properly to the disk. But mission managers said they had other versions of that data and were more concerned with the ascent than descent anyway.

“We’ve got loads of that data, so were not super concerned with getting that,” Smith said.

NASA is beginning to plan the next Ares 1 test flight, which is targeted for 2012.


https://spacenews.com/nasa-views-ares-1-x-test-rocket-debut-success-despite-parachute-mishap/
https://spacenews.com/parachute-glitch-results-hard-splashdown-ares-1-x/
https://spacenews.com/nasa-finalizes-ares-1-vibration-fix/
« Ostatnia zmiana: Marzec 02, 2019, 14:16 wysłana przez Orionid »

Offline kanarkusmaximus

  • Administrator
  • *****
  • Wiadomości: 23205
  • Ja z tym nie mam nic wspólnego!
    • Kosmonauta.net
Odp: Ares I-X
« Odpowiedź #7 dnia: Październik 29, 2019, 10:50 »
To już 10 lat od startu!




Online Orionid

  • Weteran
  • *****
  • Wiadomości: 24418
  • Very easy - Harrison Schmitt
Odp: Ares I-X
« Odpowiedź #8 dnia: Listopad 01, 2019, 17:12 »
Ares I-X – 10 lat temu
BY KRZYSZTOF KANAWKA ON 1 LISTOPADA 2019

(...) Start testowej wersji rakiety Ares I-X nastąpił 28 października 2009 roku. Start odbył się z wyrzutni LC-39B kompleksu KSC na Florydzie. W tym locie wykorzystano rakietę z nieaktywnym górnym członem oraz makietą kapsuły Orion. Po tym starcie planowano jeszcze kolejne loty testowe, w tym wersji Ares I-Y. Docelowo w ciągu kilku lat (przed 2014 rokiem) Orion wraz z załogą miał się znaleźć na orbicie. Przed końcem dekady lat dziesiątych człowiek miał powrócić na Księżyc. (...)

Start Aresa I-X można uznać za “ślepą uliczkę” w rozwoju astronautyki. Ten sposób wynoszenia astronautów na orbitę został szybko zarzucony. Warto jednak zauważyć, że kapsuły, którą rakiety Ares I miały wynosić – MPCV Orion – są nadal w planach eksploracyjnych.

(NASA, PFA)
https://kosmonauta.net/2019/11/ares-i-x-10-lat-temu/

EDIT 29.10.2023
https://twitter.com/airandspace/status/1718384692129656921
Cytuj
On this day in 2009, the Ares I-X rocket lifted off on a test flight. At 327-feet tall, the test vehicle produced 2.6 million pounds of thrust to accelerate the rocket to Mach 4.76, nearly reaching hypersonic speeds.]On this day in 2009, the Ares I-X rocket lifted off on a test flight. At 327-feet tall, the test vehicle produced 2.6 million pounds of thrust to accelerate the rocket to Mach 4.76, nearly reaching hypersonic speeds.
« Ostatnia zmiana: Październik 29, 2023, 08:50 wysłana przez Orionid »

Offline kanarkusmaximus

  • Administrator
  • *****
  • Wiadomości: 23205
  • Ja z tym nie mam nic wspólnego!
    • Kosmonauta.net
Odp: Ares I-X
« Odpowiedź #9 dnia: Listopad 02, 2019, 14:01 »
To byłoby ciekawe, gdyby NASA jakoś dociągnęła do Aresa I, który by mógł latać. Ciekawe do czego by to wykorzystano. Orion? Coś czuję,że mało prawdopodobne.

Polskie Forum Astronautyczne

Odp: Ares I-X
« Odpowiedź #9 dnia: Listopad 02, 2019, 14:01 »