Autor Wątek: Juno  (Przeczytany 111607 razy)

0 użytkowników i 1 Gość przegląda ten wątek.

Online Orionid

  • Weteran
  • *****
  • Wiadomości: 24490
  • Very easy - Harrison Schmitt
Odp: Juno
« Odpowiedź #240 dnia: Wrzesień 02, 2016, 22:53 »
Biegun północny Jowisza widziany z odległości 195 000 kilometrów od centrum planety.
Zdjęcie zostało wykonane 27 sierpnia przez instrument  JunoCam na ok. 2 godziny przed największym zbliżeniem do Jowisza.

Unlike the equatorial region's familiar structure of belts and zones, the poles are mottled with rotating storms of various sizes, similar to giant versions of terrestrial hurricanes. Jupiter's poles have not been seen from this perspective since the Pioneer 11 spacecraft flew by the planet in 1974.

http://www.jpl.nasa.gov/spaceimages/details.php?id=PIA21030
http://www.jpl.nasa.gov/news/news.php?feature=6613
http://www.pulskosmosu.pl/2016/09/02/polnocny-biegun-jowisza-nie-przypomina-niczego-w-ukladzie-slonecznym/
« Ostatnia zmiana: Wrzesień 02, 2016, 22:59 wysłana przez Orionid »

Online Orionid

  • Weteran
  • *****
  • Wiadomości: 24490
  • Very easy - Harrison Schmitt
Odp: Juno
« Odpowiedź #241 dnia: Październik 15, 2016, 11:44 »
Manewr PRM mający zmniejszyć okres orbitalny Juno z 53,4 dnia do 14 dni został odroczony do 11 grudnia 2016. Powodem są problemy z zaworami helu w systemie sprężania paliwa. Ich  otwieranie trwa kilka minut zamiast kilku sekund.

Mission managers for NASA's Juno mission to Jupiter have decided to postpone the upcoming burn of its main rocket motor originally scheduled for Oct. 19. This burn, called the period reduction maneuver (PRM), was to reduce Juno's orbital period around Jupiter from 53.4 to 14 days. The decision was made in order to further study the performance of a set of valves that are part of the spacecraft's fuel pressurization system. The period reduction maneuver was the final scheduled burn of Juno's main engine.

"Telemetry indicates that two helium check valves that play an important role in the firing of the spacecraft's main engine did not operate as expected during a command sequence that was initiated yesterday," said Rick Nybakken, Juno project manager at NASA's Jet Propulsion Laboratory in Pasadena, California. "The valves should have opened in a few seconds, but it took several minutes. We need to better understand this issue before moving forward with a burn of the main engine."

After consulting with Lockheed Martin Space Systems of Denver and NASA Headquarters, Washington, the project decided to delay the PRM maneuver at least one orbit. The most efficient time to perform such a burn is when the spacecraft is at the part of its orbit which is closest to the planet. The next opportunity for the burn would be during its close flyby of Jupiter on Dec. 11.

http://www.jpl.nasa.gov/news/news.php?feature=6648
http://www.pulskosmosu.pl/2016/10/15/juno-ma-problemy-z-glownym-silnikiem/
« Ostatnia zmiana: Październik 17, 2016, 20:18 wysłana przez Orionid »

Online Orionid

  • Weteran
  • *****
  • Wiadomości: 24490
  • Very easy - Harrison Schmitt
Odp: Juno
« Odpowiedź #242 dnia: Październik 21, 2016, 22:19 »
Formacje chmur Jowisza zobrazowane przez Microwave Radiometer (MWR).  MWR może pozyskiwać dane z kilkaset km wgłąb atmosfery Jowisza .

This composite image depicts Jupiter's cloud formations as seen through the eyes of Juno's Microwave Radiometer (MWR) instrument as compared to the top layer, a Cassini Imaging Science Subsystem image of the planet. The MWR can see a couple of hundred miles (kilometers) into Jupiter's atmosphere with its largest antenna. The belts and bands visible on the surface are also visible in modified form in each layer below.

http://www.jpl.nasa.gov/spaceimages/details.php?id=PIA21107

Online Orionid

  • Weteran
  • *****
  • Wiadomości: 24490
  • Very easy - Harrison Schmitt
Odp: Juno
« Odpowiedź #243 dnia: Październik 21, 2016, 22:27 »
Widok nasłonecznionej części Jowisza i jego wirującej atmosfery  utworzony przez naukowca Alexa Mai z wykorzystaniem  danych z JunoCam.

This image of the sunlit part of Jupiter and its swirling atmosphere was created by a citizen scientist (Alex Mai) using data from Juno's JunoCam instrument. JunoCam's raw images are available at www.missionjuno.swri.edu/junocam for the public to peruse and process into image products.

http://www.jpl.nasa.gov/spaceimages/details.php?id=PIA21108

Polskie Forum Astronautyczne

Odp: Juno
« Odpowiedź #243 dnia: Październik 21, 2016, 22:27 »

Online Orionid

  • Weteran
  • *****
  • Wiadomości: 24490
  • Very easy - Harrison Schmitt
Odp: Juno
« Odpowiedź #244 dnia: Październik 24, 2016, 03:18 »
Juno w safe mode

NASA’s Juno Jupiter orbiter, already dealing with a thruster problem that postponed a key maneuver, went into a safe mode hours before a close approach to the giant planet Oct. 19.

At an Oct. 19 press conference during a planetary science meeting in Pasadena, California, project officials said that Juno went into safe mode at 1:47 a.m. Eastern, more than 13 hours before the spacecraft made its closest approach to Jupiter, about 5,000 kilometers above its cloud tops, in its elliptical orbit around the planet.

http://spacenews.com/juno-spacecraft-goes-into-safe-mode/

Online Orionid

  • Weteran
  • *****
  • Wiadomości: 24490
  • Very easy - Harrison Schmitt
Odp: Juno
« Odpowiedź #245 dnia: Październik 26, 2016, 22:52 »
Kontrolerzy misji wysłali do sondy Juno komendę wyjścia z trybu awaryjnego 24 października. Potwierdzenie wykonania komendy dotarło na Ziemię 25 października. Sonda weszła w tryb awaryjny 18 października po tym jak monitor wydajności oprogramowania rozpoczął reset komputera pokładowego sondy. Aktualnie zespół badaczy wciąż analizuje przyczyny resetu i testuje dwa zawory silnika głównego.

Źródło  http://www.pulskosmosu.pl/2016/10/26/sonda-juno-wychodzi-z-trybu-awaryjnego-pierwsze-manewry/
http://www.jpl.nasa.gov/news/news.php?feature=6661

Online Orionid

  • Weteran
  • *****
  • Wiadomości: 24490
  • Very easy - Harrison Schmitt
Odp: Juno
« Odpowiedź #246 dnia: Listopad 09, 2016, 06:46 »
Trwa śledztwo dotyczące anomalii silnika sondy.
Podejrzewa się , że  podobny problem mógł dotknąć inną wersję silnika Leros zainstalowanego na Intelsat 33E. W tym przypadku wejście satelity na GEO jest opóźnione o kilka miesięcy.

Istnieje duże prawdopodobieństwo, że nie dojdzie do manewru zmniejszającego okres orbitalny Juno, zaplanowanego na 10 grudnia 2016.
Jeśli nie dojdzie w ogóle do redukcji okresu orbitalnego sondy to zostanie wykonanych mniej zbliżeń do Jowisza , a to oznacza mniejszą ilość zebranych danych naukowych.


NASA investigating possible link between Juno and Intelsat thruster problems
by Jeff Foust — November 3, 2016


[...]Green said one part of the investigation is studying any connection to a similar malfunctioning thruster. “It was made known to us that the rocket we currently have on Juno, the retrorocket that gets us into orbit, is in the same family as one that has been malfunctioning on the Intelsats,” he said.

He was referring to Intelsat 33e, a Boeing 702MP satellite launched in August. On Sept. 9, Intelsat announced that the spacecraft’s entry into service in geostationary orbit would be delayed from fourth quarter of 2016 to the first quarter of 2017 because of a thruster malfunction. That model of satellite uses a Leros engine, manufactured by Moog, to raise its orbit after deployment.

While Juno uses a different version of the Leros engine than the one on Intelsat 33e, and launched five years earlier, Green said engineers were investigating whether there may be any links between the two. “Whenever that happens, we step back and take a good look at what we have, how it’s implemented, look at the failure modes for these similar things,” he said, “and then do an analysis on what we’re going to do next and what the probability is of what we have on our spacecraft failing.” [...]

http://spacenews.com/nasa-investigating-possible-link-between-juno-and-intelsat-thruster-problems/
« Ostatnia zmiana: Listopad 09, 2016, 22:26 wysłana przez Orionid »

Offline station

  • Sir Astronaut
  • Weteran
  • *****
  • Wiadomości: 3829
Odp: Juno
« Odpowiedź #247 dnia: Listopad 09, 2016, 15:17 »
Kto jest producentem wspomnianego silnika? Lockheed?
Rosyjski program kosmiczny to dziś strzelanie rakietami w martwe obiekty na orbicie.

Online Orionid

  • Weteran
  • *****
  • Wiadomości: 24490
  • Very easy - Harrison Schmitt
Odp: Juno
« Odpowiedź #248 dnia: Listopad 09, 2016, 16:42 »
Wygląda na to , że Europa zaliczyła kolejną kosmiczną wpadkę.

Juno’s British-built engine readied for all-important firing at Jupiter
June 29, 2016 Stephen Clark

Juno’s Leros 1b main engine, designed and built by Moog-ISP in Westcott, Buckinghamshire, is gearing up for a make-or-break 35-minute firing to steer the spacecraft into a wide multi-million mile ellipse around Jupiter. Confirmation of the burn’s success is expected around 11:53 p.m. EDT July 4 (0353 GMT July 5).

https://spaceflightnow.com/2016/06/29/junos-british-built-engine-readied-for-all-important-firing-at-jupiter/
« Ostatnia zmiana: Listopad 09, 2016, 16:51 wysłana przez Orionid »

Online Orionid

  • Weteran
  • *****
  • Wiadomości: 24490
  • Very easy - Harrison Schmitt
Odp: Juno
« Odpowiedź #249 dnia: Grudzień 11, 2016, 07:18 »
11 grudnia 2016 o 17:04 UTC Juno przeleci po raz trzeci w celach badawczych  w pobliżu Jowisza (PJ3).
Okres orbitalny sondy nadal wynosi 53,5 dnia. Przed PJ4 zaplanowanym na 2 lutego 2017 możliwe jest  usunięcie anomalii silnika głównego, co spowoduje skrócenie okresu orbitalnego do t = 14 dni.

At the time of closest approach (called perijove), Juno will be about 2,580 miles (4,150 kilometers) above the gas giant's roiling cloud tops and traveling at a speed of about 129,000 mph (57.8 kilometers per second) relative to the planet. Seven of Juno's eight science instruments will be energized and collecting data during the flyby.

"This will be the first time we are planning to operate the full Juno capability to investigate Jupiter's interior structure via its gravity field," said Scott Bolton, principal investigator of Juno from the Southwest Research Institute in San Antonio. "We are looking forward to what Jupiter's gravity may reveal about the gas giant's past and its future."

Mission managers have decided not to collect data with the Jovian Infrared Auroral Mapper (JIRAM) instrument during the December flyby, to allow the team to complete an update to the spacecraft software that processes JIRAM's science data. A software patch allowing JIRAM's operation is expected to be available prior to the next perijove pass (PJ4) on Feb. 2, 2017.


http://www.jpl.nasa.gov/news/news.php?feature=6695
http://www.pulskosmosu.pl/2016/12/09/sonda-juno-przygotowuje-sie-do-niedzielnego-przelotu-blisko-jowisza/
« Ostatnia zmiana: Grudzień 11, 2016, 07:21 wysłana przez Orionid »

Online Orionid

  • Weteran
  • *****
  • Wiadomości: 24490
  • Very easy - Harrison Schmitt
Odp: Juno
« Odpowiedź #250 dnia: Grudzień 14, 2016, 11:16 »
Zdjęcie   masywnych przeciwnie obracających się burz w kształcie  białych owali na południowej półkuli Jowisza  wykonane  z odległości 24600 kilometrów w dniu 11 grudnia 2016.

This image, taken by the JunoCam imager on NASA's Juno spacecraft, highlights the seventh of eight features forming a 'string of pearls on Jupiter -- massive counterclockwise rotating storms that appear as white ovals in the gas giant's southern hemisphere. Since 1986, these white ovals have varied in number from six to nine. There are currently eight white ovals visible.

The image was taken on Dec. 11, 2016, at 9:27 a.m. PST (12:27 EST), as the Juno spacecraft performed its third close flyby of Jupiter. At the time the image was taken, the spacecraft was about 40,000 miles (24,600 kilometers) from the planet.


http://www.jpl.nasa.gov/news/news.php?feature=6702
http://www.pulskosmosu.pl/2016/12/17/sonda-juno-fotografuje-perle-na-jowiszu/
« Ostatnia zmiana: Grudzień 17, 2016, 08:56 wysłana przez Orionid »

Offline kanarkusmaximus

  • Administrator
  • *****
  • Wiadomości: 23218
  • Ja z tym nie mam nic wspólnego!
    • Kosmonauta.net
Odp: Juno
« Odpowiedź #251 dnia: Grudzień 14, 2016, 18:10 »
Śliczności!

Offline kanarkusmaximus

  • Administrator
  • *****
  • Wiadomości: 23218
  • Ja z tym nie mam nic wspólnego!
    • Kosmonauta.net
Odp: Juno
« Odpowiedź #252 dnia: Grudzień 26, 2016, 00:05 »
Czy coś wiadomo w jakim stanie jest obecnie Juno? Czy problemy techniczne rozwiązano?

Online Orionid

  • Weteran
  • *****
  • Wiadomości: 24490
  • Very easy - Harrison Schmitt
Odp: Juno
« Odpowiedź #253 dnia: Grudzień 26, 2016, 14:25 »
Miejmy nadzieję że  przed następnym zbliżeniem do Jowisza  problem zostanie rozwiązany.

A smiley face can be seen in this image of Jupiter created by a citizen scientist (Randy Ahn) using data from Juno's JunoCam instrument. In JunoCam's view, Jupiter is only half-lit, so Ahn copied and flipped the half-smile to make a full smile out of Jupiter's swirling atmosphere.

http://www.jpl.nasa.gov/news/news.php?feature=6653

Online Orionid

  • Weteran
  • *****
  • Wiadomości: 24490
  • Very easy - Harrison Schmitt
Odp: Juno
« Odpowiedź #254 dnia: Styczeń 06, 2017, 01:07 »
Na pokładzie Juno znajduje się  tablica poświęcona Galileuszowi. Płytka została wykonana przez włoską ASI.
Jej rozmiar wynosi 7,1 x 5,1 cm, a waga - 6 g. Przedstawia ona wizerunek Galileusza  jak też opis wykonany przez niego w styczniu 1610, gdy pierwszy raz dostrzegł cztery księżyce nazwane później na jego cześć galileuszowymi.

Również na pokładzie sondy umieszczone są trzy figurki wykonane z klocków LEGO przedstawiające:  Galileusza, rzymskiego boga Jowisza i jego żonę Juno. Postać Juno posiada lupę jako symbol poszukiwania prawdy, a Jupiter - piorun. Figurki Lego  zostały  wykonane z aluminium, który zabezpiecza przed ekstremalnymi warunkami w czasie podróży kosmicznej.

http://www.forum.kosmonauta.net/index.php?topic=1669.msg100617#msg100617   (2016)

Polskie Forum Astronautyczne

Odp: Juno
« Odpowiedź #254 dnia: Styczeń 06, 2017, 01:07 »